cnady-manufacture,factory,supplier from China

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products     TypeItem60HPMCE65HPMCF7

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.The applications includes:tile adhesivetile grout,joints and crack fillersgypsum plasterexterior insulation and finish system,EIFSskim coat manual plasterself-leveling compounddetergentwater-borne paintStructural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN&n

Methyl Hydroxyethyl cellulose MELLUTEL is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution.  It has the characteristics of thickening, adhesion, dispersion, emulsification, film formation, suspension, adsorption, gelation, surface activity, water retention and colloid protection.  Aqueous solutions can be used as colloidal protectants, emulsifiers and dispersants due to their surface active properties.  Hydroxyethyl methyl cellulose aqueous solution has good hydrophilicity, which is a high

Hydroxypropyl methyl cellulose is a non-ionic water-soluble cellulose ether widely used as a thickener, protective colloid, stabilizer, suspending agent and water-retaining agent in many construction applications.Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3Modified products     TypeItemHPMCputtyYT100M  YT100MN  YT1365  YT150MSmortarYT200M  YT200MSSelf levelingYT400GypsumYT-7166   Specification  of non modified products &n

HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs. These vegetable capsules are an attractive, all-natural dosage form that retain all the advantages - easy to swallow, effectively mask taste and odor, and allow product visibility. HPMC capsules are also starch-free, gluten-free and preservative-free, and meet the strict dietary needs of customers that choose a vegetarian lifestyle.

Application of low viscosity hydroxypropyl methylcellulose (HPMC) in ceramics: In the ceramic industry, it is used as an adhesive for molding surprise ceramic products, giving lubricity and water retention, and improving the original strength of raw materials.The concentrated solution is adsorbed on the surface of ceramic particles, so that the friction between particles is reduced and the lubricity is enhanced, and the manufactured molded products have the required surface smoothness and dimensional stability; The sintered ceramic products with excellent electrical properties can be obtained

This product is industrial HPMC, which is mainly used as dispersant in PVC production, and is the main auxiliary agent for preparing PVC by suspension polymerization. In addition, it is used as thickener, stabilizer, emulsifier, excipient, water-retaining agent, film-forming agent, etc. in the production of other petrochemical, paint, building materials, paint remover, agricultural chemicals, printing ink, textile printing and dyeing, ceramics, paper making, cosmetics and other products.

Hydroxyethyl methyl cellulose is a odorless, odorless, non-toxic white powder that can be dissolved in cold water to form a transparent viscous solution.  It has the characteristics of thickening, adhesion, dispersion, emulsification, film formation, suspension, adsorption, gelation, surface activity, water retention and colloid protection.  Aqueous solutions can be used as colloidal protectants, emulsifiers and dispersants due to their surface active properties.  Hydroxyethyl methyl cellulose aqueous solution has good hydrophilicity, which is a highly efficient w

HPMC Vegetable Empty Capsule: Vegetable Capsule - Visible HealthVegetable Raw MaterialETON capsule is made of HPMC, a kind of vegetable material which is animal free. It is separated from animal material totally. No animal remaining in the products at all. It is created under the direction of green, health and safety.Advantages:Lower Moisture:It is right for stuffing which is easy to absorb moisture and/or react with moisture content.Stability:No cross linking reaction because of high stability. HPMC is a kind of vegetable cellulose which contains no amino acid.

Cellulose ethers are often used as water-retaining agents in (desulfurized) gypsum mortar. Years of research have shown that,water-retaining agent has a very important influence on the gypsum quality and anti-plastering layer performance of plastering gypsum.

HPMC (Hydroxypropyl methylcellulose) Capsules are two-piece capsules made from cellulosic raw materials that satisfy vegetarian, religion, cultural and policy needs.

Hydroxyethyl methyl cellulose ether, referred to as HEMC, is a non-ionic cellulose ether obtained from natural polymer material cellulose through a series of chemical reactions. It is an odorless, tasteless, non-toxic white to off-white powder or granule, which can be dissolved in cold or hot water to form a transparent viscous solution, which has the functions of thickening, binding, water retention, dispersion, emulsification and film formation.

The role of cellulose ether in honeycomb ceramics is very important.

ApplicationTile AdhesiveTile grout,Joints and Crack FillersGypsum Manual / Machine PlasterExterior Insulation and Finish System(EIFS)Skim Coat Manual PlasterSelf-leveling CompoundWater-borne paint 

Tile cement mortar is used to attach tiles on concrete or block walls. It comprises cement, sand, limestone,  HPMC and various additives, ready to be mixed with water before use.Normal tile cement is usually economic mortar which has lower content of cement and RDP (Redispersible polymer powder) than standard tile cement.

ETON HPMC is mainly used in the field of honeycomb ceramics. Honeycomb ceramics were first used to purify the exhaust gas of small cars. Now they have been widely used in chemical industry, electric power metallurgy, petroleum, electronics, electrical appliances, machinery and other industries. With the development of technology, more and more thin～walled honeycomb ceramics are used.

Hydroxypropyl Methyl Cellulose (Mellutel YT-50) is beside Polyvinylalcohol (PVA) one of the most commonly used suspending agents. Mellutel YT-50 controls the particle size and their distribution, influences the porosity and defines the bulk weight of PVC. The porosity of the polymer particles is strongly linked to the property to adsorb additives like plasticizers or stabilizers. Thereby, the properties of the polymer during processing and of the final product can be controlled. Ultra low viscous Mellutel YT-50 is the most suitable product for PVC manufacturing processes.

 Tile cement mortar is used to attach tiles on concrete or block walls.

HPS is a kind of ionic hydroxypropyl starch ether, which is produced by a series of chemical and physical reactions with starch as raw material. It is a kind of non-toxic, tasteless white or beige power, which can be dissolved in cold water to form transparent or translucent viscous liquid.

Appearance is White to slightly off-white fibrous or granular powder.

HPMC is a white or slightly yellowish powder, which is odorless, tasteless and non-toxic. It can be dissolved in cold water and organic mixed solvents to form a transparent viscous solution. The aqueous solution has surface activity, high transparency, strong stability, and is not affected by pH when dissolved in water. It has thickening and antifreezing effects in shampoo and body wash, and has water retention and good film-forming property for hair and skin.

The hydroxypropyl methyl cellulose ether hpmc is the essential condition for thin bed technology for tile adhesive.Can be used as retarder, water retention agent, thickener and binder.For example, the performance of mortar is very different between natural sand and machine-made sand. Cellulose ether for ordinary dry mixed mortar shall have the following characteristics:Structural formula  (n～2)/2 OR=-OH、-OCH3、-[OCH2CH(CH3)]nOH or-[OCH2CH(CH3)]OCH3 Specification of non modified products          Type      ItemHPMCPD